The outer stainless steel braided cover adds fire and heat resistance and gives the hose a high pressure rating. Sizes -6 and up are manufactured with an anti-static PTFE tube suitable for use as main fuel lines. 200 Series has been an industry standard since the mid 60’s when it was first used as brake lines to reduce expansion and provide a much firmer “pedal” and more …
The pressure ratings shown in Penflex alog specifiions charts for corrugated and interlocked hose are valid at 70°F. Elevated service temperatures will decrease these pressure ratings by factors shown in the following chart. Derating factors are based on braid alloy. Please keep in mind, maximum working temperature of the end fittings
200 Series Stainless Braid over PTFE Hose. Raceworks 200 Series PTFE Braided Hose is constructed from a PTFE inner tube that is compatible with all fuels, oils, nitrous including brake and clutch fluids. The PTFE tube is covered by a stainless steel outer cover that is durable, and resistant to abrasion and expansion.
200 Series Stainless Braid over PTFE Hose. Raceworks 200 Series PTFE Braided Hose is constructed from a PTFE inner tube that is compatible with all fuels, oils, nitrous including brake and clutch fluids. The PTFE tube is covered by a stainless steel outer cover that is durable, and resistant to abrasion and expansion.
5/8X500FT CL PLANT MASTER 200 RED UPC 770075452140 Vacuum (In. Hg) 20 Continuous Operating Temperature Range-40 F to +200 F Minimum Bend Radius (in) 6 Min. Burst Pressure (psi) 600 Hose Inside Diameter (in) 0.625 Hose Inside Diameter (mm)
Hose pressure and temperature. One of the main factors in considering the stainless steel braided flex hose is when your appliion requires a hose that can handle high temperature ranges and high pressure ranges. The stainless steel hose temperature range is -200°C to +700°C with pressure ranging from 170 Bar on the 1/4″ to 8 Bar on the 8
pressure rating of the hoses for higher temperatures. A 50 N.B. Hose is required for a temperature of 200 C and working pressure of 19 kg/cm². The specified pressure for 50 N.B. Single wire braid hose as per table I is 28 kg/cm². The correction factor at
TEMPERATURE :- 49degrees C to +150degrees C Continuous. Speedflow 200 series hose is the premier stainless steel PTFE hose in a BLACK STAINLESS STEEL FINISH. Hose is sold in 5 meter rolls. *Except -12 size which is sold ina 3 meter roll. Speedflow 200 Series Teflon® Braided Hose is constructed from a PTFE (Teflon®) inner tube compatible with
75 ft/sec (22 m/sec) liquid, in braided hose, a flexible metal liner of fully interlocked hose should be used. When the hose is installed in a bent condition, these flow values should be reduced by 50% for a 90° bend, 25% for a 45° bend, and so on, proportional to the angle of bend.
Hose pressure and temperature. One of the main factors in considering the stainless steel braided flex hose is when your appliion requires a hose that can handle high temperature ranges and high pressure ranges. The stainless steel hose temperature range is -200°C to +700°C with pressure ranging from 170 Bar on the 1/4″ to 8 Bar on the 8
The pressure ratings shown in Penflex alog specifiions charts for corrugated and interlocked hose are valid at 70°F. Elevated service temperatures will decrease these pressure ratings by factors shown in the following chart. Derating factors are based on braid alloy. Please keep in mind, maximum working temperature of the end fittings
The pressure rating for the fully annealed SS316 tubing, OD = 1.500" and Wall thickness = 0.065" is 1,500 psi. (See the inch tube pressure rating table on this page). The temperature derating factor and severity of service derating factors are 0.81 and 0.67, respectively. The maximum design pressure = 1,500 x 0.81 x 0.67 = 814 psi.
• 8773 (Standard), -50 to 750 F • 8773-H (High temp), -50 to 1000 F • 8773-C (cleaned for oxygen), -50 to 750 F Temperature and Pressure Ratings Table 2 Hose Pressure NPS Rating PSIG ½" 1310 ¾" 915 1" 645 1¼" 545 1½'' 560 2" 450 2½" 570
Temperature-200 to 500 Degree Celsius Pressure Rating High, Low, Medium Services Hydro Testing, Pneumatic Test, PMI Testing We Sell High Quality Stainless Steel Braided Flexible Hose Pipes at Reasonable Prices
The outer stainless steel braided cover adds fire and heat resistance and gives the hose a high pressure rating. Sizes -6 and up are manufactured with an anti-static PTFE tube suitable for use as main fuel lines. 200 Series has been an industry standard since the mid 60’s when it was first used as brake lines to reduce expansion and provide a much firmer “pedal” and more …
Raceworks 200 Series PTFE Braided Hose is constructed from a PTFE inner tube that is compatible with all fuels, oils, nitrous including brake and clutch fluids. The PTFE tube is covered by a stainless steel outer cover that is durable, and resistant to abrasion and expansion. The Raceworks 200 Series Hose is the best option for use on fuel
200 (14) 800 (55.0) 20.0 (1.0) 4 (101.6).216 (.321) NOTE: Temperature range: -100ºF to +400ºF (-73ºC to +204ºC) NCW & NCB seamless convoluted PTFE is Nomex braided for extreme light weight, flexibility and kink resistance that operates over a wide
Temperature Derating. To calculate a working pressure derated for elevated temperature, multiply the hose working pressure shown in the alog by the appropriate derating factor below. Note: The working pressure of an assely at elevated temperatures may be affected by fitting type, material, and method of attachment.
Temperature rating from cryogenic to 1500ºF Meets or exceeds ISO 10380 at maximum working pressure Shipped in mill lengths or Braided Hose-On-Reel for easy fabriion Series 300 Hose — Annular, Stainless Steel, Standard Pitch Hose
Temperature De-rating Factors Temperature, F -325 100 200 300 400 500 600 700 800 850 Temperature, C -200 37 93 148 204 260 315 371 426 454 Factors 1.00 1.00 0.84 0.76 0.70 0.65 0.62 0.59 0.57 0.56 Table 3. Hose Assely of DK-Lok Tube Fittings at
pressure rating of the hoses for higher temperatures. A 50 N.B. Hose is required for a temperature of 200 C and working pressure of 19 kg/cm². The specified pressure for 50 N.B. Single wire braid hose as per table I is 28 kg/cm². The correction factor at
Temperature Derating. To calculate a working pressure derated for elevated temperature, multiply the hose working pressure shown in the alog by the appropriate derating factor below. Note: The working pressure of an assely at elevated temperatures may be affected by fitting type, material, and method of attachment.
200 ST SERIES STEEL BRAID REINFORCED FEP CORE THERMOPLASTIC HOSE COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F MINIMUM DYNAMIC MINIMUM RP PARTC # OF NOMINAL I.D. NOMINAL O.D
The pressure ratings shown in Penflex alog specifiions charts for corrugated and interlocked hose are valid at 70°F. Elevated service temperatures will decrease these pressure ratings by factors shown in the following chart. Derating factors are based on braid alloy. Please keep in mind, maximum working temperature of the end fittings
75 ft/sec (22 m/sec) liquid, in braided hose, a flexible metal liner of fully interlocked hose should be used. When the hose is installed in a bent condition, these flow values should be reduced by 50% for a 90° bend, 25% for a 45° bend, and so on, proportional to the angle of bend.
TEMPERATURE :- 49degrees C to +150degrees C Continuous. Speedflow 200 series hose is the premier stainless steel PTFE hose. Hose is sold per meter. Speedflow 200 Series Teflon® Braided Hose is constructed from a PTFE (Teflon®) inner tube compatible with all brake & clutch fluids, oil & fuels. The outer stainless steel braided cover adds fire
Temperature ratings from cryogenic to 1500˚F Meets or exceeds ISO 10380b Sold only as braided hose Series 800 — Annular, Stainless Steel, High Pressure Hose and Braid Nominal Hose Size (in.) Diameter Hose Size (DN) Braid Layers Nominal Outside (in.)
Double Braided Metallic Hose Asselies 7012 Overview A higher pressure, standard pitch metallic hose. Standard sizes range between 6mm to 300mm but are also available up to 450mm. Suitable for up to 8,000 flexing cycles. 316L SS Liner as standard.
